blue vertical line seperating the left page from news and events

Safety Tips

Before using your bicycle, make sure it is ready to ride. You should always inspect your bike to make sure all parts are secure and working properly. Remember to:

 

1. Wear a Properly Fitted Bicycle Helmet

Protect your brain, save your life. For more information see the National Highway Traffic Safety Administration publication “Easy Steps to Properly Fit a Bicycle Helmet.”

2. Adjust Your Bicycle to Fit

Stand over your bicycle. There should be 1 to 2 inches between you and the top tube (bar) if using a road bike and 3 to 4 inches if a mountain bicycle. The seat should be level front to back. The seat height should be adjusted to allow a slight bend at the knee when the leg is fully extended. The handlebar height should be at the same level with the seat.

3. Check Your Equipment

Before riding, inflate tires properly and check that your brakes work.

4. See and Be Seen

Whether daytime, dawn, dusk, foul weather, or at night, you need to be seen by others. Wearing white has not been shown to make you more visible. Rather, always wear neon, fluorescent, or other bright colors when riding day or night. Also wear something that reflects light, such as reflective tape or markings, or flashing lights. Remember, just because you can see a driver doesn’t mean the driver can see you.

5. Watch for and Avoid Road Hazards

Always ride with at least one hand on the handlebars. Carry books and other items in a bicycle carrier or backpack.

6. Control Your Bicycle

Be on the lookout for hazards such as potholes, broken glass, gravel, puddles, leaves, and dogs. All these hazards can cause a crash. If you are riding with friends and you are in the lead, yell out and point to the hazard to alert the riders behind you.

7. Avoid Riding at Night

It is far more dangerous to ride at night than during the day because you are harder for others to see. If you have to ride at night, wear something that makes you more easily seen by others. Make sure you have reflectors on the front and rear of your bicycle, in addition to reflectors on your tires.

Rules of the Road – Bicycling on the Road

Bicycles are considered vehicles, and cyclists have the same rights and the same responsibilities to follow the rules of the road as motorists. When riding, always:

 

1. Go With the Traffic Flow

2. Obey All Traffic Laws

A bicycle is a vehicle and you’re a driver. When you ride in the street, obey all traffic signs, signals, and lane markings.

3. Yield to Traffic When Appropriate

Almost always, drivers on a smaller road must yield (wait) for traffic on a major or larger road. If there is no stop sign or traffic signal and you are coming from a smaller roadway (out of a driveway, from a sidewalk, a bike path, etc.), you must slow down and look to see if the way is clear before proceeding. This also means yielding to pedestrians who have already entered a crosswalk.

4. Be Predictable

Ride in a straight line, not in and out of cars. Signal your moves to others.

5. Stay Alert at All Times

Use your eyes AND ears. Watch out for potholes, cracks, wet leaves, storm grates, railroad tracks, or anything that could make you lose control of your bike. You need your ears to hear traffic and avoid dangerous situations; don’t wear a headset when you ride.

6. Look Before Turning

When turning left or right, always look behind you for a break in traffic, then signal before making the turn. Watch for left- or right-turning traffic.

7. Watch for Parked Cars

Ride far enough out from the curb to avoid the unexpected from parked cars (like doors opening, or cars pulling out).

More Information

For more information on bicycle safety, visit the National Highway Traffic Safety Administration (NHTSA) Web site at: nhtsa.dot.gov

//